Flat products
We supply premium materials – worldwide
Globally sourced from our approved suppliers or locally stocked and distributed we have created the basis for delivering outstanding materials and service. Our tailor-made packages can be developed to address your specific needs. Why not benefit from our experience and our wide range of capabilities?
hot rolled steel sheet in coils
- Thickness 1,2 - 25,4mm
- Width 1000-2020mm
Typical Grades:
- DD11, DD12, DD13, DD14 as per DIN EN 10111:2008
- S235, S275, S355 as per DIN EN 10025-2:2004
- S315MC, S355MC, S420MC, S460MC, S500MC, S550MC, S600MC as per DIN EN 10149-2:2013
Hot rolled steel sheet in coils pickled and oiled available as well.
All mentioned products can be cut into lengths, sold as sheets in bundles or slit and sold as slit strip.
Other grades and standards on demand.
cold rolled steel sheet in coils
- Thickness 0,30 - 3,00mm
- Width 850 - 1800mm
Typical Grades:
- DC01, DC03, DC04, DC05, DC06, DC07 as per DIN EN 10130:2006
- HC260LA, HC300LA, HC340LA, HC380LA, HC420LA, HC460LA, HC500LA as per DIN EN 10268:2013
All mentioned products can be cut into lengths, sold as sheets in bundles or slit and sold as slit strip.
Other grades and standards on demand.
non grain oriented electrical steel (NGO)
- Thickness 0,35; 0,50; 0,65; 1,00mm
- Width 20 – 1.250mm
Typical grades as per EN 10106 (fully finished)
- M235-35A, M250-35A, M270-35A, M300-35A, M330-35A
- M250-50A, M270-50A, M290-50A, M310-50A, M330-50A, M350-50A, M400-50A, M470-50A, M530-50A, M600-50A, M700-50A, M800-50A, M940-50A
- M310-65A, M330-65A, M350-65A, M400-65A, M470-65A, M530-65A, M600-65A, M700-65A, M800-65A, M1000-65A
- M600-100A, M700-100A, M800-100A, M1000-100A, M1300-100A
High permeability grade, semi finished and e-mobility electrical steel on demand.
Available coatings:
C3, C4, C5, C6, bonding varnish
grain oriented electrical steel (GO)
- Thickness 0,20; 0,23; 0,27; 0,30mm
- Width 20 – 1.000mm
Typical grades as per EN 10107
- M85-23P, M90-23P, M95-23P, M100-23P, M110-23S, M120-23S, M127-23S
- M90-27P, M95-27P, M100-27P, M110-27P, M120-27S, M130-27S, M140-27S
- M100-30P, M105-30, M110-30, M120-30S, M130-30S, M140-30S, M150-30S
- M115-35, M125-35, M135-35S, M145-35S, M155-35S, M165-35S
Available coatings:
C2, C5
Hot dipped galvanized steel sheet in coils
- Thickness 0,30 - 4,00mm
- Width 700- 1829mm
Typical Grades as per DIN EN10346:2015
- DX51D, DX52D, DX53D, DX54D, DX55D, DX56D, DX57D,
- S220GD, S250GD, S280GD, S320GD, S350GD, S390GD, S420GD, S450GD, S550GD,
- HX160YD, HX180YD, HX180BD, HX220YD, HY220BD, HX260YD, HX260BD, HX260LAD, HX300YD, HX300BD, HX300LAD, HX340BD, HX340LAD, HX380LAD, HX420LAD, HX460LAD, HX500LAD,
- HCT450X, HCT490X, HCT590X, HCT780X, HCT980X, HCT980XG, HCT690T, HCT780T, HCT600C, HCT780C, HCT980C,
- HDT450F, HDT580F, HDT580X, HDT750C, HDT760C, HDT950C.
Coatings
Z = galvanized
ZA = Zinc - Aluminium (Galfan)
ZF = Zinc - Ferric (Galvannealed)
AS = Aluminium - Silicon (FAL)
ZE = Electrogalvanized (EG)
ZM = Zinc - Magnesium
Coating layer as per DIN EN10346:2015
Surface quality
NA = regular spangle
MA = minimized spangle
MB = skinpassed - zero spangle
MC = skinpassed – zero spangle – better surface than MB
Surface treatment
Chemically passivated with Cr3 or Cr free
Oiled: lightly/ regularly/ heavy oiled
Phosphated
All mentioned products can be cut into lengths, sold as sheets in bundles or slit and sold as slit strip.
Other grades and standards on demand.
Non Ferrous Metals:
- Aluminum
- Aluminum Alloys
- Brass
- Bronce
- Copper
- Copper Alloys
- Copper Nickel
- German Silver
- Lead
- Nickel
- Tin
- Titanium
- Zinc
- Zinc Alloys
In all common international grades and customized to your specificationsfor following types of products:
- Foils
- Strip/Coil Blanc or coated, with or without protecting foil, pre-aged or natural
- Sheets/Plates Blanc or coated, with or without protecting foil; pre-aged or natural
- Solid Bars, Round, Hexagonal, Rectangular, etc.
- Profiles (as per drawing)
- Hollow Sections, Round, Hexagonal, Rectangular, etc.
- Tubes, hot rolled, cold drawn, pressed
- Wire, hot rolled, cold drawn
Organic coated steel flat products
- Thickness 0,30 – 3,0 mm
- Width 600 – 1650 mm
Typical grades as per EN 10130, EN 10152, 10346
- DC01, DC03, DC04, DC05, DC06, DX51D, DX52D, DX53D, DX54D, DX55D, DX56D, DX57D, S220GD, S250 GD, S280 GD, S320 GD, S350 GD
Available surfaces coating:
-/UC: uncoated
ZE/EG: electrolytical galvanized
Z/GI: hot dipped galvanized
ZF/GA: galvannealed
ZM: zinc magnesium coated
AS: hot dipped fire aluminized
AZ: aluminium zinc coated
ZA: galfan
Organic coating material:
Polyester ( SP), Polyamid – modified Polyester (SP-PA), Polyurethan ( PUR) , POlyamid – modified Polyurtehan ( PUR-PA), High-durable-Polymer (HDP), Polyvinylidenfluorid (PVDF), Epoxid (EP)
Available RAL colors:
RAL colors on request
Standards EN10088-2/ EN 10151
cold rolled steel in coils
- Thickness 0,2 – 8 mm
- Width 50 – 2000 mm
- Execution 2B, 2R, 2G, 2K, 2F, 2M, 2H, 2D, 2E, polished/ brushed, patterned, scotch brite, special surfaces
hot rolled steel in coils
- Thickness 2 - 13 mm (sheets up to 200 mm)
- Width 915 - 3000 mm
- Execution black, 1D, 1M, 1U
precision rolled steel in coils
- Thickness 0,02 – 2,5 mm
- Width 2 - 1500 mm
- Execution 2H, 2R, 2F, 2Q, 2D, patterned, special surfaces
Typical grades:
Ferrite
1.4016, 1.4511, 1.4509, 1.4510, 1.4520, 1.4589, 1.4003, 1.4512, 1.4000, 1.4713, 1.4724,
Austenite
1.4301, 1.4307, 1.4311, 1.4306, 1.4303, 1.4541, 1.4550, 1.4318, 1.4310, 1.4372, 1.4372, 1.4509, 1.4622, 1.4113, 1.4401, 1.4404, 1.4420, 1.4432, 1.4436, 1.4435, 1.4571, 1.4521,
Duplex
1.4462, 1.4162, 1.4362, 1.4662, 1.4501, 1.4410, 1.4635, 1.4637
Martensitic
1.4021, 1.4034, 1.4006, 1.4024, 1.4120, 1.4028, 1.4419, 1.4031, 1.4122, 1.4110, 1.4116
Precipitation hardened
1.4568, 1.4542, 1.4574
All mentioned products can be cut into lengths, sold as sheets in bundles or slit and sold as slit strip.
Other grades and standards on demand.
